How do I reset/restart my SmartWheels Magnetic GPS Tracker?

How do I reset/restart my Magnetic GPS Tracker?

Restarting your tracker is simple — you just need to access the power switch inside the device. Here's how:

Step 1 — Open the tracker


  1. Place the tracker on a flat surface.
  2. Carefully remove the rear cover.
  3. Remove the white silicone seal that protects the On/Off switch and SIM slot.
  4. Set both covers aside — you'll need to put them back on afterwards.

Step 2 — Restart the device



  1. Locate the small On/Off switch inside the open compartment.
  2. Slide the switch to the OFF position and wait about a minute.
  3. Slide it back to the ON position and wait a few moments for the device to boot up.
  4. Replace the silicone seal and rear cover securely.

Step 3 — Check the indicator lights

Once powered on, here's what to look for:

LightWhat it means
Red light blinkingDevice is connecting to the network
Red light fast blinkingConnected and actively using data
Blue lights solidShows current battery level

Step 4 — Restart the app

Close the app fully on your phone and reopen it to make sure it refreshes the connection.

📹 Watch: How to restart your magnetic GPS tracker <Video>


Still not coming back online after a restart?

Head over to our GPS Tracker Showing Offline guide for more troubleshooting steps. <Link>

    • Related Articles

    • My GPS Tracker Won't Connect to App?

      GPS Tracker Showing Offline Alternate questions this article answers: Why is my magnetic GPS tracker offline? Why is my magnetic GPS tracker not connecting? My magnetic tracker shows offline — what do I do? Why does a tracker go offline? Going ...
    • How long does Magnetic GPS Tracker last?

      Alternate questions: What is the average battery life of the Magnetic GPS Tracker? Does using my GPS tracker indoors affect battery life? What’s the ideal temperature range for GPS trackers to function efficiently? The SmartWheels Magnetic GPS ...
    • What does blinking light mean in my Magnetic GPS Tracker?

      The LED lights on your tracker show you its connection and battery status at a glance. Red light — Network connection Red light blinking Trying to connect to the network Red light solid Connected to the network Blue light — Battery level The blue ...
    • How can I check remaining battery life of my magnetic GPS tracker?

      Alternate questions this article answers: How can I check if my GPS tracker is draining its battery too quickly? You can check the battery status of your tracker anytime using the SmartWheels app. On the map screen, you'll see the current battery ...